Getting started with design:
Real-time LCD Screen: It helps in reporting real-time indoor air quality
Intelligent sensors: It has an integrated sensor system that detects pollutants across a whole room
360-degree HEPA filter: This type of air filter can theoretically remove at least 99.97% of dust, pollen, mould, bacteria, and any airborne particles with a size of 0.3 microns (µm)
Hidden wheels: Easy to manoeuvre across a room – designed for hard surfaces.
Assembling your machine:
- Use both hands to lift your machine out of the box, by its base.
- Your machine comes with a HEPA filter, carbon filter and permanent catalytic filter. These are already installed in your machine.
- Lift the conic amplifier out of the box and place it on the top of your machine.
- Rotate the conic amplifier until it clicks securely into place.
- Plug in and press the power button on the screen or remote control.
Where to position your Purifier?
- Your machine is fitted with wheels to make it easier to move. Position your machine on a level floor.
- For the most effective purification, position your machine on the edge of the room at least three and a half feet from the wall, with the conic amplifier pointing to the furthest point, along the wall.
- You can also position your machine facing diagonally across the room.
Take full control with the MyDyson app:
Access step-by-step setup and support, control how and when your Dyson air purifier operates, monitor air quality with visual updates and automatically keep up to date with the latest software updates.
Download the MyDyson app from the App store or Google Play.
Open the app and follow the on-screen instructions to create a new account.
Connecting to your smart home:
Using Amazon Alexa
Ask Alexa to enable the Dyson skill – to help control your air purifier. Set a routine that automates how your machine works with other devices in your home.
Using Google Assistant
Control all of your connected purifiers with Google or set a routine to automate how your machine works with other devices in your home. Just say “Hey Google” to get started.
Using Siri
Connect your Dyson machine to Siri Shortcuts to control it by voice on your Apple device.
Continuos monitor the AQ data:
The Continuous monitoring is turned off by default and you need to turn it on to check your AQ data continuously. Your Dyson air purifier will gather air quality and temperature information and will display it on the LCD screen and the MyDyson app.
How to turn the Continuous monitoring on:
To turn it on or off using the remote control, press and hold the Auto mode button for five seconds. The LCD screen will indicate the Continuous monitoring status.
Turning on the Wi-Fi connectivity:
Press and hold the Stand-by on/off button on your machine for five seconds to turn the Wi-Fi on or off.
Auto purify the air quality:
Set your air purifier to Auto mode and the on-board sensors will intelligently adjust the settings of the machine according to the air quality.
Air quality: Your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop.
Airflow speed: The airflow speed will increase to its maximum until the target air quality has been reached.
Set airflow speed and direction:
Increase or decrease the airflow speed and change air direction from 0 ° to 5 0 ° using the remote or the MyDyson app.
Select Breeze mode by repeatedly pressing down on the airflow direction button until it activates or by using the MyDyson app.
Night mode:
In Night mode, your Dyson air purifier will continue to clean the air quietly, at a lower airflow speed with its LCD screen dimmed.
Press the Night mode and Sleep timer button to scroll through the timer options.
How to change your HEPA filter?
The LCD screen and the MyDyson app will alert you when your filter life is running low. Replacement filters are available at www.plattino.ae and www.dyson.com.
1. Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock. Lift the conic amplifier off your machine.Lift the outer cover off the base of your machine.
2. Remove the filter
The HEPA filter is located on the outer cover. Press the filter release buttons located on the inner rim and lift the outer cover off the filter. Dispose of the filter.
3. Install a new filter
Remove your replacement filter from any packaging. Place the filter on the base of your machine.
Place the outer cover over the filter and press down until it clicks securely into position.
Place the conic amplifier on your machine and rotate until it clicks securely in position.
Plug in, switch on and reset your filter life.
Reset your HEPA filter life
It’s important to reset the filter life after replacing your filter. Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five until a tick appears on the screen.
The filter life has been reset and your machine is ready to use.
How to change your carbon filter?
The LCD screen and the MyDyson app will alert you when your filter life is running low. Replacements are available to buy on www.plattino.ae and www.dyson.com.
1. Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock. Lift the conic amplifier off your machine.
Lift the outer cover off the base of your machine.
2. Remove the filter
The carbon filter is wrapped around the central body of your machine. Pull each of the four clips towards you to release the filter.
Dispose of the filter.
3. Install a new filter
Remove your replacement filter from any packaging.
Wrap the filter around the base of your machine, fit the clips in position and push each one to secure the filter.
Place the outer cover and HEPA filter back in position on the base of your machine.
Place the conic amplifier on your machine and rotate until it clicks securely in position.
Plug in switch on, and reset your filter life.
Reset your carbon filter life:
It’s important to reset your filter life after you have replaced your filter. Press and hold the down airflow direction button on the remote control.
The LCD screen on your machine will count down from five until a tick appears on the screen.
The filter life has been reset and your machine is ready to use.
Looking after your machine:
To always get the best performance from your Dyson air purifier, it’s important to regularly clean it and check for blockages.
Cleaning your machine
If your machine is dusty, wipe with damp, lint-free cloth.
Check the sensor inlets on the left hand side of the conic amplifier for dust and debris.
Look for dust and debris in the outer cover and in the conic amplifier. Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
Grab the product with the link below:
https://plattino.ae/products/dyson-purifier-big-quiet-formaldehyde-bp04-prussian-blue-gold